Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Clay Eickemeyer

Bearbeitung genehmigt von Clay Eickemeyer

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Disconnect the touchpad board
[* black] Flip up the small locking flap on the touchpad board cable ZIF connector, located just below the previous one.
-[* black] Lift the sides of the connector over the edges of the socket and slide it straight out to disconnect it.
+[* black] Lift the connector until its [link|https://guide-images.cdn.ifixit.com/igi/PHlxASKrZF3HngNB.full|arms|new_window=true] are free and slide it straight out to disconnect it.
[* icon_note] The remaining ZIF connector pull tabs in this procedure may be labelled ***DB***.