Änderungen an Schritt Nr. 4
Bearbeitet von Clay Eickemeyer –
Bearbeitung genehmigt von Clay Eickemeyer
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [title] Disconnect the touchpad board | |
| [* black] Flip up the small locking flap on the touchpad board cable ZIF connector, located just below the previous one. | |
| [* black] Lift the connector until its [link|https://guide-images.cdn.ifixit.com/igi/PHlxASKrZF3HngNB.full|arms|new_window=true] are free and slide it straight out to disconnect it. | |
| - | [* icon_note] The remaining ZIF connector pull tabs in this procedure may be |
| + | [* icon_note] The remaining ZIF connector pull tabs in this procedure may each be labeled ***DB***. |