Änderungen an Schritt Nr. 5
Bearbeitet von Clay Eickemeyer –
Bearbeitung genehmigt von Clay Eickemeyer
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [title] Disconnect the left haptics | |
| + | [* icon_note] If you aren't replacing your button board, you can leave this cable connected and lay the board over the right side of the frame after you've removed the screws. |
| [* icon_caution] Be careful when disconnecting the haptics, as the cables and connector are very delicate. Pry only on the base of the white connector and not on the cables or socket. | |
| - | [* icon_note] If you aren't replacing your button board, you can leave this cable connected and lay the board over the right side of the frame after you've removed the screws. |
| [* black] Insert the point of your spudger under the neck of the haptics cable connector. | |
| [* black] Gently pry up to disconnect it. |