Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von Richard

Bearbeitung genehmigt von Richard

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] On the right side of the Cricut, locate the circuit board screwed in to the cover just removed.
[* black] Locate the four screws securing the circuit board to the shell.
-[* red] Using a J1 screwdriver, unscrew each of the four 10mm screws.
+[* red] Use a Phillips #1 screwdriver to unscrew each of the four 10 mm screws.