Änderungen an Schritt Nr. 35
Bearbeitet von Adam O'Camb -
Bearbeitung genehmigt von Adam O'Camb
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [title] Remove heat sink and apply thermal paste |
| [* icon_note] If this is your first time applying thermal paste, I recommend using a quality thermal paste brand like Arctic Silver and reading a |
| [* icon_note] If this is your first time applying thermal paste, I recommend using a quality thermal paste brand like Arctic Silver and reading a |
| [* icon_caution] With the motherboard out, turn it upside down on a static free surface. |
| [* black] To remove the heatsink and replace thermal paste, remove the screws in the correct order (marked with a number on the heatsink). |
| [* icon_caution] Clean old thermal paste with isopropyl-alcohol. Ensure that after applying thermal paste it doesn't leak onto the motherboard (if it's on the green square, it's fine). |
| [* icon_caution] When putting the heat sink back on, try to have the screw holes align on your first try. This is to maintain an even spread of the thermal paste. |
| [* black] Rescrew in the correct order (refer to the numbers on the heat sink). |
| [* icon_note] |
| [* icon_note] |