Repariere deine Sachen Community Store

Änderungen an Schritt Nr. 1

Bearbeitet von Kristen Gismondi –

Bearbeitung genehmigt von Kristen Gismondi

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* icon_caution] Make sure the laptop is powered off and unplug all cables before beginning any repair.
[* black] Flip your laptop over and place on a flat surface so you can access the screws on the base cover.
-[* orange] Using a Phillips #0 screwdriver, remove the four 4 mm screws (orange) from the bottom edge of the laptop
-[* black] Using the same screwdriver, remove the remaining six 7 mm screws (red) from the back panel of the laptop.
+[* red] Remove the six 7 mm screws from the back panel of the laptop using a Phillips #0 screwdriver.
+[* orange] Remove the four 4 mm screws from the bottom edge of the laptop using a Phillips #0 screwdriver.