Änderungen an Schritt Nr. 15
Bearbeitet von Spencer Pennington –
Bearbeitung genehmigt von Spencer Pennington
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| + | [* icon_caution] The screws in this step have different threads. Keep close track of where screws go to avoid stripping the screw wells. |
|---|---|
| + | [* black] Use a Phillips screwdriver to remove eight screws from the right end of the Cricut: |
| + | [* red] Two 10.2 mm‑long [link|https://guide-images.cdn.ifixit.com/igi/JtDTFFbAeHngjqcb.full|screws|new_window=true] securing the right end top metal bar, which include a washer and a locking washer. |
| + | [* orange] Four 10.0 mm‑long [link|https://guide-images.cdn.ifixit.com/igi/ot1N6pqk4OOCEUZD.full|screws|new_window=true] securing the large white plastic bracket. |
| + | [* yellow] Two 7.9 mm‑long [link|https://guide-images.cdn.ifixit.com/igi/w5RvlMOMHsYHCeHM.full|screws|new_window=true] securing the large white plastic bracket, which include white plastic spacers. |
| + | [* icon_reminder] During reassembly, be sure to reconnect the [link|https://guide-images.cdn.ifixit.com/igi/1VoGESevcWPYCQRe.full|motor ground wire|new_window=true] to the right-most screw that secures the top metal bar. |
Bild 1
Kein vorheriges Bild
Hinzugefügt