Änderungen an Schritt Nr. 6
Bearbeitet von Joshua Moreno –
Bearbeitung genehmigt von Joshua Moreno
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Unscrew the two 10 mm Phillips #1 screws at the head of the fan with the Phillips Screwdriver. | |
| [* black] Unscrew the two larger 14 mm Phillips #1 screws with the Phillips Screwdriver that are located below the first two screws that you just removed. | |
| [* black] Unscrew the two 10 mm Phillips #1 screws, that are located in between the 14 mm screws, with the Phillips Screwdriver. | |
| - | [* |
| + | [* icon_note] Make sure you place the same-sized screws in the right place when you reassemble the fan. |