Änderungen an Schritt Nr. 6
Bearbeitet von Sarah Westberg –
Bearbeitung genehmigt von Sarah Westberg
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* red] Unscrew the two (10 mm) Phillips #1 screws at the head of the fan with the Phillips Screwdriver. |
|---|---|
| - | [* orange] Unscrew the two larger (14 mm) Phillips #1 screws with the Phillips Screwdriver that are located below the first two screws that you just removed. |
| - | [* yellow] Unscrew the two (10 mm) Phillips #1 screws, that are located in between the 14 mm screws, with the Phillips Screwdriver. |
| - | [* icon_note] Make sure you place the same-sized screws in the right place when you reassemble the fan. |
| + | [* red] Use a Phillips #1 screwdriver to remove the two 10 mm screws at the head of the fan. |
| + | [* orange] Remove the two larger 14 mm Phillips #1 screws located below. |
| + | [* yellow] Remove the two 10 mm Phillips #1 screws located between the 14 mm screws. |