Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Alan Truong -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] To remove the USB port, remove these four screws holding down the port and metal brackets.
-[* black] Remove the connector from the logic board.
+[* red] To remove the USB port, remove these four screws holding down the port and metal brackets.
+[* blue] Remove the connector from the logic board.
[* black] If the cords have a zip tie also fixing them down, cut it off to free them.
[* black] Replace with new USB port.

Bild 2

Alte Version

Neue Version