Änderungen an Schritt Nr. 2
Bearbeitet von Kristen Gismondi –
Bearbeitung genehmigt von Kristen Gismondi
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Unscrew the screws with arrows listing 5-8. The piece that was being held by the 5-8 screws should come out. |
|---|---|
| - | [* icon_note] You may need a longer Phillips #1 screw driver for screw #7. |
| + | [* red] Remove the four 18.6 mm screws with arrows listing 5-8 using a Phillips #1 screwdriver. |
| + | [* black] Remove the wheel assembly on the left side of the vacuum. |
| + | [* icon_note] You may need a longer Phillips #1 screwdriver for screw #7. |