Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 11

Bearbeitet von kevin

Bearbeitung genehmigt von Nick

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Put the upper housing back on the drill. make sure that the upper housing lines up with the lower housing screw holes.
[* black] Put all eight screws back in the slots. P.S: don't worry, the screws are all the same size.
[* black] Put all eight screws back in the slots. P.S: don't worry, the screws are all the same size.
[* black] Tighten the screws back into place with the Phillips head screwdriver.
[* black] After the screws are back in place, make sure they are all snug.