Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 9

Bearbeitet von Stuart Maxwell -

Bearbeitung genehmigt von Walter Galan

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Fit the replacement screen into the black frame.
+[* black] The ribbon should lay on the same side as the hinge.
+[* black] Make sure the screw holes in the circuit board line up with screw holes in the black frame.
+[* black] Fasten the screen and circuit board to the black frame with the four silver screws.
+[* black] Be careful not to lose these screws when screwing them back in. They are very small and hard to handle.