Änderungen an diesem Schritt
Bearbeitet von Luke Farmer –
Bearbeitung genehmigt von Luke Farmer
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| + | [* black] Turn Off and Unplug the Keyboard Ensure the keyboard is completely powered off and disconnected from any power source before starting. |
|---|---|
| + | [* black] Remove Screws (12 Phillips #1, 7.5mm) Use a screwdriver to remove all screws from the back panel. Some screws might be hidden under rubber feet or other parts, so be thorough. Keep track of the screws to make reassembly easier. |
| + | [* black] Open the Case Gently lift the top panel of the keyboard to expose the internal components. Be careful of any ribbon cables or connectors attached to the panel—you may need to disconnect them to fully remove the top. |
| + | [* black] Remove the Old Power Switch (2 Phillips 1 Size: 5.5 mm) Heat your soldering iron and use a desoldering braid or pump to remove the solder from the pins of the old switch. Once the solder is removed, gently pull the old switch out of its place. |
Bild 1
Kein vorheriges Bild
Hinzugefügt
Bild 2
Kein vorheriges Bild
Hinzugefügt
Bild 3
Kein vorheriges Bild
Hinzugefügt