Änderungen an Schritt Nr. 1
Schritt-Zeilen
| + | [* black] Set the projector on its side so the the front is facing to your left. |
|---|---|
| + | [* black] Insert an opening tool into the seam between the black chassis and the silver case. |
| + | [* black] Pry around the perimeter until the case fully releases. |
| + | [* icon_caution] When removing the cover, be careful as there is an internal connector attached to the lid and the projectors motherboard. You’ll have to carefully detach that before fully removing the projector case. |
| + | [* black] Remove the case. |
Bild 1
Kein vorheriges Bild
Hinzugefügt
Bild 2
Kein vorheriges Bild
Hinzugefügt
Bild 3
Kein vorheriges Bild
Hinzugefügt