Änderungen an Schritt Nr. 3
Schritt-Zeilen
| + | [* black] On the bottom of the camera, remove the following screws: |
|---|---|
| + | [* red] Four M1.7x5.0mm Phillips #000 screws |
| + | [* black] Using a plastic opening pick, partially peel up the top of the back rubber grip. |
| + | [* black] Carefully begin lifting the back cover up away from the camera body. |
| + | [* icon_caution] Do not lift it all the way off. There is still a ribbon cable attaching the back cover to the main PCB board. |
| + | [* orange] Using a plastic spudger tool, gently pry off the back cover ribbon cable from the main PCB board. |
Bild 1
Kein vorheriges Bild
Hinzugefügt
Bild 2
Kein vorheriges Bild
Hinzugefügt
Bild 3
Kein vorheriges Bild
Hinzugefügt