Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 1

Bearbeitet von Jonathan -

Bearbeitung genehmigt von Jonathan

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* yellowred] Remove the three (3) screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two screws on the right, and use a PH1 for the one on the left.
[* greenorange] It is not necessary to fully remove the black screw on the left, but if you do, be careful to not lose the spring from the long, black screw holding the left side of the hard drive.
[* yellowred] Remove the three (3) screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two screws on the right, and use a PH1 for the one on the left.
[* greenorange] It is not necessary to fully remove the black screw on the left, but if you do, be careful to not lose the spring from the long, black screw holding the left side of the hard drive.

Bild 1

Alte Version

Neue Version

Bild 3

Alte Version

Neue Version