Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 1

Bearbeitet von Amos Hine -

Bearbeitung genehmigt von Amos Hine

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* red] Remove the three screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two silver, 3.4mm screws on the right, and use a PH1 for the black, 10.3mm screw on the left.
[* orange] It is not necessary to fully remove the black screw on the left10.3mm screw, but if you do, be careful to not lose the spring from the long, black screw holding the left side of the hard drivespring.
[* red] Remove the three screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two silver, 3.4mm screws on the right, and use a PH1 for the black, 10.3mm screw on the left.
[* orange] It is not necessary to fully remove the black screw on the left10.3mm screw, but if you do, be careful to not lose the spring from the long, black screw holding the left side of the hard drivespring.