Skip to main content

Änderungen an Schritt Nr. 5

Bearbeitet von Sem Vandekerckhove

Bearbeitung genehmigt von Jake Devincenzi

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Now, its time to release the vibrator connector, and then release the lower connector on the main board ( see pic 2). Remove the black tape first, and then use some tweezers to pull out the connector.
[* red] Now, its time to release the vibrator connector, and then release the lower connector on the main board ( see pic 2). Remove the black tape first, and then use some tweezers to pull out the connector.
[* icon_caution] Once its done, lift by one side the main board, and you can see the LCD connector. Open the white tab and remove the flat cable.