Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 5

Bearbeitet von Sem Vandekerckhove

Bearbeitung genehmigt von Jake Devincenzi

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Now, its time to release the vibrator connector, and then release the lower connector on the main board ( see pic 2). Remove the black tape first, and then use some tweezers to pull out the connector.
[* icon_caution] Once its done, lift by one side the main board, and you can see the LCD connector. Open the white tab by lifting it up at the edge, and remove the flat cable.
[* icon_caution] Once its done, lift by one side the main board, and you can see the LCD connector. Open the white tab by lifting it up at the edge, and remove the flat cable.