Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von AmitP -

Bearbeitung genehmigt von Jake Devincenzi

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* red] Unscrew 8 T10 screws from the cooling unit
-[* icon_note] The screw are somewhat hidden, so they cannot be see in the picture.
+[* red] Unscrew 8 T10 screws from the cooling unit. G5 models with the large Fujikura heat sinks (not shown in picture) will have 8 2.5mm hex screws.
+[* icon_note] The screws are somewhat hidden, so they cannot be see in the picture.
[* icon_note] To visualize the location of the screws look 3 steps ahead.
[* black] The screws will loosen but will not come out, they are designed to loosen the unit, but remain in place.