Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 5

Bearbeitet von R Trent -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* red] NOTE: Here are the standoffs without the cooling unit installed to make it easier to understand where the screws are located. Remove the bottom 2 standoffs so it is easier to remove the power supply.
-[* yellow] Check the pin connections for any damage. All the pins highlighted in yellow should appear straight up and not appear bent. DON'T TOUCH THE PINS. A ben pin will result in your computer not powering on.
+[* yellow] Check the pin connections for any damage. All the pins highlighted in yellow should appear straight up and not appear bent. DON'T TOUCH THE PINS. A bent pin will result in your computer not powering on.