Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Daniel Hodges

Bearbeitung genehmigt von Daniel Hodges

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] With a Phillips #2 screwdriver, remove five 5mm screws from the "quarter circle" circuit board.
[* blackicon_caution] When removingmoving the board, wires will still be attached. Place the board to the side,attached; be careful not to stretch the wires.
[* blackicon_caution] When removingmoving the board, wires will still be attached. Place the board to the side,attached; be careful not to stretch the wires.
[* black] Remove the green quarter circle circuit board and place to the side.