Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Daniel Hodges

Bearbeitung genehmigt von Daniel Hodges

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] On the rectangular circuit board, locate the white wires that are connected to a white plastic connector.
[* red] Remove the two plastic connectors from the circuit board by pinching the tabs while pulling outward on the connector.
[* icon_note] When removing the quarter circle circuit board, wires will still be attached. Place the board to the side while being careful not to stretch the wires.