Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 7

Bearbeitet von Daniel Hodges

Bearbeitung genehmigt von Daniel Hodges

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] With a Phillips #1 screwdriver, remove four 3mm screws from the silver metal circuit board.
[* icon_caution] When moving the board, wires will still be attached; be careful not to stretch the wires.
[* black] Remove and place the metal circuit board to the side.
[* icon_caution] When removing the board, wires will still be attached. Place the board to the side while being careful not to stretch the wires.