Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 7

Bearbeitet von Jacob Phillips

Bearbeitung genehmigt von Jacob Phillips

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] With a Phillips #1 screwdriver, remove four 3mm screws from the silver metal circuit board.
[* icon_caution] When moving the board, wires will still be attached;This board has two white ribbons attached to it. Once again, be careful not to stretch the wiresthese.
[* icon_caution] When moving the board, wires will still be attached;This board has two white ribbons attached to it. Once again, be careful not to stretch the wiresthese.
[* black] Remove and place the metal circuit board to the side.