Xbox One Kinect Teardown Schritt Nr.14 Verlauf

Änderungen an Schritt Nr. 14

Bearbeitet von Julia – 21. Nov 2013

Bearbeitung genehmigt von Julia

	[* black] Xbox One Kinect Repairability: *6 out of 10* (10 is easiest to repair).
	[* green] It's super easy to replace the fan once you get inside.
	[* green] While there isn't much to fix inside, most components are modular and held in place with screws. If you need to replace one of the eight million cameras, you can...
-	[* red] ~~...aside from~~ the three little cameras in the center of the bar. Those are held in place with soldered-in straps because Microsoft.
+	[* red] …Well, except for the three little cameras in the center of the bar. Those are held in place with soldered-in straps, because Microsoft.
	[* red] Screws hidden under tamper-evident tape and tricky clips make it hard to get inside.
-	[* red] Same four screw types ~~seen~~ in the original Kinect are back, (still) including a repair-inhibiting security bit: T6, T10, T10 Security, and Phillips #0.
+	[* red] Same four screw types in the original Kinect are back, (still) including a repair-inhibiting security bit: T6, T10, T10 Security, and Phillips #0.