Änderungen an Schritt Nr. 1
Bearbeitet von Nicolas Siemsen -
Bearbeitung genehmigt von Nicolas Siemsen
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Remove the silver cotter pin that holds the gauge to the body of the pump. |
| [* black] With the cotter pin removed, simply pull the gauge straight up and away from the body; it does NOT screw in but instead is a friction fit. The cotter pin is what prevents it from coming out. Be sure not to lose the small wave washer between the gauge and the body. |