Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 2

Bearbeitet von Nicolas Siemsen -

Bearbeitung genehmigt von Nicolas Siemsen

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* blackred] With the gauge removed from the body you can now carefully use a flat blade screw driver, or a small hook, to remove the black o-ring from the brass stem on the gauge.
[* blackred] With the gauge removed from the body you can now carefully use a flat blade screw driver, or a small hook, to remove the black o-ring from the brass stem on the gauge.
[* black] Match the size of this o-ring with one from your kit. Likely, the new o-ring will have a slightly thicker "section" or thickness but should have the same inner diameter. The best one I found was a 2mm section, 4.4mm inner diamater o-ring.
[* black] Rub a small amount of synthetic, preferably silicone based grease on the o-ring.
[* black] Set aside the gauge until reassembly.

Bild 1

Alte Version

Neue Version