Änderungen an Schritt Nr. 2
Bearbeitet von Nicolas Siemsen -
Bearbeitung genehmigt von Nicolas Siemsen
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* red] With the gauge removed from the body you can now carefully use a flat blade screw driver, or a small hook, to remove the black o-ring from the brass stem on the gauge. |
| [* black] Match the size of this o-ring with one from your kit. Likely, the new o-ring will have a slightly thicker "section" or thickness but should have the same inner diameter. |
| [* black] Match the size of this o-ring with one from your kit. Likely, the new o-ring will have a slightly thicker "section" or thickness but should have the same inner diameter. |
| [* black] Rub a small amount of synthetic, preferably silicone based grease on the o-ring. |
| [* black] Set aside the gauge until reassembly. |