Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von Nicolas Siemsen

Bearbeitung genehmigt von Nicolas Siemsen

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Re-install the diaphragm and test the actuator again.
[* black] After cleaning and greasing the diaphragm is now held a solid 16Hg vacuum for several minutes with not change. There must have been some debris under the edge of the diaphragm letting air in slowly. Now that the leak has been fixed it can be re-installed.
[* black] If cleaning and greasing the diaphragm does not stop the leaks, or if the diaphragm is visible cracked or torn, the actuator will need to be replaced with a new or good/tested used actuator.

Bild 1

Kein vorheriges Bild

Hinzugefügt