Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Alan Truong -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Locate the hex screws in each corner and remove them.
-[* red] Grip the top of the clear panel and lift it upwards, and pull the ADC cable through the hole.
+[* red] Locate the hex screws in each corner and remove them.
+[* black] Rotate the display so the legs of the display are now facing you
+[* black] Grip the top of the clear panel and lift it upwards, and pull the ADC cable through the hole.
[* black] Remove the grey back panel by lifting the bottom and pulling the ADC cable through the hole.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version

Bild 3

Alte Version

Neue Version