Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 7

Bearbeitet von Aaron Poon -

Bearbeitung genehmigt von Aaron Poon

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Remove the three 9.0 mm Phillips screws holding together the firing chamber.
[* green] Remove the single 7.0 mm Phillips screw below the barrel.
[* yellow] Remove the two 14.0 mm Philips screws using a screwdriver with a length of approximately 4.0 inches and a diameter of approximately 0.2 cm.
[* red] Remove the three 9.0 mm Phillips screws holding together the firing chamber.
[* green] Remove the single 7.0 mm Phillips screw below the barrel.
[* yellow] Remove the two 14.0 mm Philips screws using a screwdriver with a length of approximately 4.0 inches and a diameter of approximately 0.2 cm.