Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Blaire McCreary -

Bearbeitung genehmigt von Blaire McCreary

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Locate the two sections of the cutter unit (mint green ) but remove only the cutter blade (as shown in the picture). Using the thumb and forefinger, pull up, applying a moderate amount of pressure until the cutter blade loosens and is removed. Replace with a new blade, pressing until it snaps into place.
+[* red] Locate the cutter blade unit (mint green) as shown in the picture.
+[* black] Using the thumb and forefinger, pull up, applying a moderate amount of pressure until the cutter blade unit loosens and is removed. Replace it with a [http://www.ptouchdirect.com/ptouch/tc4.html|new cutter blade unit] until it snaps into place.
[* icon_caution] Do not touch the blade with your finger.

Bild 1

Alte Version

Neue Version

Bild 2

Kein vorheriges Bild

Hinzugefügt

Bild 3

Kein vorheriges Bild

Hinzugefügt