Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Blaire McCreary -

Bearbeitung genehmigt von Blaire McCreary

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Locate the two sections of the cutter unit (mint green ) but remove only the cutter blade (as shown in the picture). Using the thumb and forefinger, pull up, applying a moderate amount of pressure until the cutter blade loosens and is removed. Replace with a new blade, pressing until it snaps into place.
+[* icon_caution] Do not touch the blade with your finger.