Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 1

Bearbeitet von Kevin Daily

Bearbeitung genehmigt von Kevin Daily



[* black] Remove the bindings.
[* black] Turn the snowboard over so the bottom of the board is facing up.
[* black] Set the snowboard down on a stable work surface so that that the snowboard does not rock or move.
[* icon_note] We recommend using a table that is small enough to fit between the curves on either side of the board or placing blocks of wood to raise the board from the table.