Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Kevin Daily

Bearbeitung genehmigt von Kevin Daily

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Remove the bindings.
[* black] Turn the snowboard over so the bottom of the board is facing up.
[* black] Set the snowboard down on a stable work surface so that the snowboard does not rock or move.
[* icon_note] We recommend using a table that is small enough to fit between the curves on either side of the board or placing blocks of wood to raise the board from the table.