Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Loren Sunding -

Bearbeitung genehmigt von Loren Sunding

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Turn the snowboard over so the bottom of the board is facing up.
[* black] Set the snowboard down on a stable work surface so that the snowboardit does not rock or move.
[* black] Set the snowboard down on a stable work surface so that the snowboardit does not rock or move.
[* icon_note] We recommend using a table that is small enough to fit between the curves on either side of the board, or placing blocks of wood to raise the board from the table.