Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 4

Bearbeitet von Kevin Daily

Bearbeitung genehmigt von Kevin Daily



[* black] Hold the iron vertically and rub the snowboard wax directly onto the iron.
[* black] let the wax drip off the iron and onto the snowboard.
[* icon_note] Only a thin layer of wax is needed. The more wax you put on, the more you will have to scrape off later. Keep this in mind when deciding how much wax to melt onto the board. It is better to put on too little and add some on than to have too much and have to scrape it off.