Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von Calvin Born -

Bearbeitung genehmigt von Calvin Born

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Use a new razor blade or a box cutter blade to remove excess wax from the board. Tilt the razor blade toward the direction of travel at 45° and use long smooth strokes form tip to tail.
[* icon_caution] Be careful! The blade is sharp and may cause severe cuts if misused.
[* black] Continue removing wax until an even, thin layer is leftleft.
[* black] Continue removing wax until an even, thin layer is leftleft.