Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von Kevin Daily -

Bearbeitung genehmigt von Kevin Daily

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Use a new razor blade or a commercial wax scraper to remove wax from the board. Tilt the wax remover toward the direction of travel at 45°45°. Pull the wax remover and use long smooth strokes form tip to tail.
[* black] Use a new razor blade or a commercial wax scraper to remove wax from the board. Tilt the wax remover toward the direction of travel at 45°45°. Pull the wax remover and use long smooth strokes form tip to tail.
[* icon_caution] Be careful! The blade is sharp and may cause cuts if misused.
[* icon_caution] Be careful not to bevel the scraper on edge and put a gouge in your board.
[* black] Continue scraping until all the wax is removed.