Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von Calvin Born -

Bearbeitung genehmigt von Calvin Born

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Use a new razor blade or a commercial wax scraper to remove wax from the board. Tilt the wax remover toward the direction of travel at 45°. Pull the wax remover and use long smooth strokes from tip to tail.
[* icon_caution] Be careful! The blade is sharp and may cut you if misused.
[* icon_caution] Be careful not to bevelMake sure the scraperedge of the blade lays flat on the board. If you tilt the edge and putonto a gouge in yourcorner you can create scratches or gouges on the board.
[* icon_caution] Be careful not to bevelMake sure the scraperedge of the blade lays flat on the board. If you tilt the edge and putonto a gouge in yourcorner you can create scratches or gouges on the board.
[* black] Continue scraping until all excess wax is removed.