Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von Loren Sunding -

Bearbeitung genehmigt von Loren Sunding

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Use a new razor blade or a commercial wax scraper to remove waxexcess wax from the board. Tilt the razor blade or wax removerscraper toward the direction of travel at 45°. Pull the wax remover and use long smooth strokes from tip to tail.
[* black] Use a new razor blade or a commercial wax scraper to remove waxexcess wax from the board. Tilt the razor blade or wax removerscraper toward the direction of travel at 45°. Pull the wax remover and use long smooth strokes from tip to tail.
[* icon_caution] Be careful! The blade is sharp and may cut you if misused.
[* icon_caution] Make sure the edge of the blade lays flat on the board. If you tilt the edge onto a corner you can create scratches or gouges on the board.
[* black] Continue scraping until all excess wax is removed.