Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Deborah Newberry -

Bearbeitung genehmigt von Deborah Newberry

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Place your Roomba upside-down on a hard surface.
[* blackred] While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
[* blackred] While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
[* black] Pull firmly on the brush to remove it.

Bild 1

Alte Version

Neue Version