Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Aaron Jacobs -

Bearbeitung genehmigt von Aaron Jacobs

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Place your Roomba upside-down on a hard surface.
[* black] UnscrewWhile holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
[* black] UnscrewWhile holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
[* black] Pull firmly on the brush to remove it.
[* green] Specify screw dimensions & screwdriver size. Include instruction to hold brush in place while unscrewing.