Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 5

Bearbeitet von Kari Bachman -

Bearbeitung genehmigt von Kari Bachman

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] MakeTake note of how the wires connect to the components to aid reassembly.
[* blackred] Remove the connectors (spaded lugs) from the circuit components as shown in the second image.
[* icon_caution] ''DO NOT pull on the wireswires, as you might pull them out of the connectors.''
[* black] You should be able to remove the connectorseach connector easily by hand. Pinch the lug between your fingers and pull in the direction of the attached wire.
[* black] MakeTake note of how the wires connect to the components to aid reassembly.
[* blackred] Remove the connectors (spaded lugs) from the circuit components as shown in the second image.
[* icon_caution] ''DO NOT pull on the wireswires, as you might pull them out of the connectors.''
[* black] You should be able to remove the connectorseach connector easily by hand. Pinch the lug between your fingers and pull in the direction of the attached wire.
[* black] If necessary, use needle-nose pliers to grasp the lug shank firmly. Gently pull the lug in the direction of the attached wire.
[* black] Gently bend the disconnected wires back and out of the work area.

Bild 2

Alte Version

Neue Version