Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 5

Bearbeitet von Kari Bachman -

Bearbeitung genehmigt von Kari Bachman

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Make note of how the wires are connectedconnect to the components to aid reassembly.
[* black] Then removeRemove the connectors (spaded lugs) from the circuit components as shown in the second image.
[*

[*
icon_caution] ''DO NOT pull on the wires as you might pull them out of the connectors.''
[* black] You should be able to remove the connectors easily by hand by pinchinghand. Pinch the lug between your fingers and pullingpull in the direction of the attached wire.wire.
[* black] If necessary, you can youuse needle-nose pliers to grasp the lug shank firmly and then gentlyfirmly. Gently pull the lug in the direction of the attached wire.
[* black] Make note of how the wires are connectedconnect to the components to aid reassembly.
[* black] Then removeRemove the connectors (spaded lugs) from the circuit components as shown in the second image.
[*

[*
icon_caution] ''DO NOT pull on the wires as you might pull them out of the connectors.''
[* black] You should be able to remove the connectors easily by hand by pinchinghand. Pinch the lug between your fingers and pullingpull in the direction of the attached wire.wire.
[* black] If necessary, you can youuse needle-nose pliers to grasp the lug shank firmly and then gentlyfirmly. Gently pull the lug in the direction of the attached wire.
[* black] Gently bend the disconnected wires back and out of the work area.