Zum Hauptinhalt wechseln

Fix Your Stuff

Right to Repair

Parts & Tools

Änderungen an Schritt Nr. 4

Bearbeitet von Kari Bachman

Bearbeitung genehmigt von Kari Bachman

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* blackicon_note] Now that you have removed the bottom from the kettle, identify all of the parts. The YELLOW arrows point to the posts for mounting the control circuit components. The RED arrows point to the following parts:
[* blackred] A: The power supply.
[* blackred] B: The two boil-dry protection switches, one on either side of the central black ring.
[* blackred] C: The power coupling. This fits into the baseplate when you place the kettle on it.
[* blackred] D: The thermostat. This is a little metal ring, half hidden by the switch cover.
[* blackred] E: The manual ON/OFF switch.
[* blackred] F: The indicator light.
[* blackred] G: The steam chamber. This heats the thermostat, which turns off the kettle automatically.
[* blackicon_note] Now that you have removed the bottom from the kettle, identify all of the parts. The YELLOW arrows point to the posts for mounting the control circuit components. The RED arrows point to the following parts:
[* blackred] A: The power supply.
[* blackred] B: The two boil-dry protection switches, one on either side of the central black ring.
[* blackred] C: The power coupling. This fits into the baseplate when you place the kettle on it.
[* blackred] D: The thermostat. This is a little metal ring, half hidden by the switch cover.
[* blackred] E: The manual ON/OFF switch.
[* blackred] F: The indicator light.
[* blackred] G: The steam chamber. This heats the thermostat, which turns off the kettle automatically.