Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von iRobot -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

+[* icon_note] There should be no cables connected to the top of the logic board at this point.
+[* black] Remove the following 12 Phillips screws from the logic board:
+ [* red] Six 4 mm around the edges of the logic board.
+ [* orange] Two 5 mm securing the right speaker to the logic board (move the speaker off of the logic board).
+ [* yellow] Three 6 mm with wavy washers in the upper, left corner of the logic board.
+ [* green] One 4 mm underneath a black bumper in the back right corner of the logic board.
+ [* blue] One 4 mm screw may not be present on some logic boards.

Bild 1

Kein vorheriges Bild

Hinzugefügt