Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von iRobot -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

+[* black] Grasp the logic board at the left edge with one hand and at the thinnest section with the other hand. Lift the left edge of the board up to approximately a 30 degree angle (if you don't have your protractor handy, just lift until the DVI port clears the right hinge).
+[* black] Once the logic board clears the ports, slide it out to the left.

Bild 1

Kein vorheriges Bild

Hinzugefügt